2015-2019 Powerstroke 650HP-700HP Power Package
Note:
You will require a built transmission to handle the added power from this package.
Tuning: This package will require Custom Tuning. Select one of the options below if needed.
2015-2016 Powerstroke Tuning:
2017-2019 Powerstroke Tuning:
Tune Revisions:
If you are looking to retain your OEM Exhaust Brake, you will want to go with the Fleece, BD, or KC Turbos option. Installing the Smeding Kit will result in the loss of the factory exhaust brake.
Fleece Cheetah 63mm VGT Turbocharger
Features:
- Max Rear Wheel HP Rating: 650HP
- Drop-In Replacement
- Lower EGT's
- 2.5" "Work Stock" Legal
- Stock Like Spooling
- Fleece Performance Exclusive FMW Compressor Wheel Technology
- 40-45 PSI Operating Range
Show more
BD 64mm Screamer Turbocharger
Features:
- 64.0mm Billet compressor wheel
- Includes updated pedestal & coolant tube for a drop-in install
- Custom mixed flow turbine (MFT) wheel with a large 65mm exducer
- Drop-in stock-appearing turbo
- Increased airflow without compromising on low-end drivability
- A large 65mm “mixed flow” turbine wheel increases turbine flow and retains the efficiency
- More boost, lower drive pressure, and lower EGT’s
- No tuning required and does not set engine codes
- Up to 81lb/min of airflow
- VSR high speed balanced
Show more
KC Stage 2 Whistler Turbocharger
2015-2016 Trucks will require the Pedestal Conversion Kit to install this turbo. Please be sure to add this pedestal in the next category if you select the KC Turbocharger.
Features:
- 6.0 10-Blade Turbo Whistle
- Upgraded Billet 64mm Compressor Wheel
- Upgraded 10-Blade High Flow Turbine Wheel
- Improved Boost Control
- Cooler EGT's
- Quick Spool Up
- 100% Drop in Ready
Note:
Show more
Smeding Non-VGT Turbocharger
For this power goal (650-700HP), please select the 364.5mm SXE Billet or 366 SXE Billet option.
Features:
- Does not require any extra parts
- Bolts directly into the factory location
- Utilizes the factory exhaust manifolds, factory up pipe, downpipe, and intake manifold
- Will work with most aftermarket intercooler piping kits
Show more
Only required if you selected the KC Turbocharger and have a 2015-2016 truck.
No Thanks
2015-2016 Pedestal Conversion Kit.
Features:
- Allows you to install a 2017-2019 Powerstroke Turbo onto your 2015-2016 Superduty
- All OEM Parts
- All in one Kit for Pedestal Conversion
- Comes with all the necessary Gaskets
Show more
Mandatory for 700HP, or else you will run out of rail pressure.
No Thanks
WDI CP4 Injection Pump
Features:
- Direct Replacement
- Up to 750HP by itself
- Can handle up to 900HP when paired with a 10mm Stroker.
Show more
These Intake Systems are not compatible with the Smeding Non-VGT Turbocharger
No Thanks
2015-2016 Pusher Intake System
Features:
- Replaces the restrictive factory intake manifold, plastic cold side charge tube & cold air intake with a free-flowing system
- Delivers the maximum amount of perfect equalized air-flow to each cylinder head
- Routed via the shortest & most efficient flow path
- Constructed around mandrel-bent steel tubing
- CNC-Machined sensor ports & flanges
- Fully TIG welded
- Dyno tested & proven to lower EGT's by 150°F on stock turbo & stock fueled trucks (bigger gains to be expected with higher performance applications
- Increase of .5-1 MPG
- Increased turbo spool
Show more
2017-2019 Pusher Intake System
Features:
- Replaces the entire anemic factory intake manifold, plastic cold side charge tube, and cold air intake assembly
- The Pusher Intake Manifold delivers maximum and perfectly equalized airflow to each cylinder head
- Both the Pusher cold side charge tube and cold air intake are routed via the shortest most efficient flow path
- A TIG-welded aluminum upper filter box utilizes the very effective factory lower filter box and ducting from the grill to create a true cold air intake. A tinted Plexiglass window and the use of the factory filter minder allows you to monitor the condition of the air filter
- The Pusher 45 CAL Air Filter utilizes the same materials and design as the 50 CAL filters tested and proven in all of the Pusher compound turbo systems
- The entire system is constructed around mandrel-bent steel tubing with CNC-machined sensor ports and flanges for an insanely rugged system designed and built to last the life of your truck
- Includes all-new HD silicone connections, full stainless T-bolt clamps, gaskets, hardware, and a CCV reroute kit for a 100% complete bolt-on install
- Fully TIG welded with precise settings to achieve optimum penetration without compromising airflow
Show more
Adding a Lift Pump will add reliability to your entire fuel system by significantly improving filtration, water separation, and removing air from your fuel system.
No Thanks
2015-2016 FASS 140GPH
Warranty: Limited Lifetime Warranty
Show more
2017-2019 Fass 220GPH
Show more